Showing posts with label GL1100. Show all posts
Showing posts with label GL1100. Show all posts

No bike for me

I took a 150 mile trip to Valparaiso, IN today to look at the GL1100 Standard I "bought" on eBay. Took it for a spin around the block. No pick up ... roll on the throttle and it thinks about moving for a while, then finally eases its way forward.

It was a lot rougher than the seller had described in the auction listing. It had obviously sat outside .. rust on the frame and on the engine and chrome. I had expected some scratches and dents, but hadn't expected rust.

The dash lights didn't work, one of the turn signals didn't work, there was a puddle of oil on the right valve cover, there was some funky looking after market wiring for the headlight and horn. There were cracks in the engine block ... might've just been cracks in the paint, might've been worse. The exhaust pipes were rusty. The tires were dry rotted.

Not the bike for me. Lots of problems, maybe minor, but not worth what I "bid" on it.

But bottom line is, even if it was perfect, the bike didn't perform like I wanted. I'm surprised that even though it was 200 lbs lighter than the GL1100 Interstate, it was just a lackadaisical about getting off the line. Whether this is true of all naked wings, or just this one, doesn't matter.

I turned around and went home. I walked away from the deal. Came home without the bike.

So my stated objective was to "get the naked goldwing out of my system." I think I accomplished that, without ever owning one. Now I'm thinking about what my next bike will be.

Cycle Recycle

I broke the clutch lever on Black Betty on her "last hurrah", the trip to Hunstville. Knocked her over in the driveway before I even left.

I bought an aftermarket part on eBay that did not fit.

I pulled Black Betty out, rode her to Cycle Recycle. For me it's a 10 mile trip.

Took the broken lever off, walked into the store.

Guy sees me and sizes me up. What year Goldwing do you have, 1981 or 82. I don't think he saw me pull up but maybe he did. I parked across the street and out of sight.

Pulls the part off the shelf and hands it to me.

$7.80.

You gotta love it. Yeah, cheaper maybe at some online place, but I'd already tried once and got the wrong part, even though it was supposed to fit a 1982 GL1100I.

This place has thousands of parts for old bikes. I saw Maggie May's side cover there, I think.

http://crc2onlinecatalog.com/

Worth a stop if you're passing through Indiana.

Three is a crowd

I'm gonna get rid of the Wing now that I have the Magna up and running, more or less.



























Ordered Carb Gaskets

I paid Mother Honda $140 for four sets of carb gaskets and o-rings. The dealer said I should have them by Yuesday next.

Riding the Wing in the meantime.

Had a grey-haired gent stop me in the parking lot. He had just dismounted from his ancient Wing, and sauntered over to me, about to mount up on mine.

"Nice bike," he said.

"Thanks, you too."

"What year?" he asked.

"82"

"Mine too", he said.

Pause.

"Looks like yours has been well cared for" he said.

"Pretty much," I said. "I bought it last June. The previous owner had had it restored after sitting for a number of years..."

"Oh," he said.

"These things'll run forever," I said.

"Yep" he said.

Back On The Wing

My Magna is running lean, I've parked it while I figure out how I'll get the carbs cleaned.

Meanwhile, I'm back on the Wing. I rode yesterday and today (100% chance of rain in the forecast) but managed so far not to get wet.

The local Honda dealer wanted $400 to clean and adjust the carbs.

There's a respective Honda V4 specialist that will do them for $350 ... but he's 700 miles away. (Road trip?!?!)

At least I have two bikes for the time being. Although I'm wishing I'd pulled the fairing off the Wing last winter.

GL1100 Seats

Corbin Best Name, Backrest $400.00 http://www.corbin.com
Travelcadesaddleman, JCWhitney www.saddlemen.com
RussellUglywww.day-long.com
Mustangnone for GL1100www.mustangseats.com
Hartcocompletely custom www.hartcoseats.com

GL1100 Dipstick

From my JCwhitney catalog page 137 chrome plated oil dipstick 75-83 $19.99
part number AGU062202

GL1100 Fork Ears

---------------------

Fork Ears


JC Whitney

------------------

Fork Diameter:
38.9 mm

---------------

GL1100 Headlights

When it was shipped to me I discovered the housing is plastic.
Plastic headlight
(HLU7BLK)

At first I was disappointed, but then I thought, how noticeable would this really be? At least it won't rust.

I'm going to buy the universal fork ears.
HLB7CH

I'm wondering if anyone has any experience or tips. I will have to find some sort of bushings to go inside the mount points, where the headlight mounts to the fork ears.

---------


Here's a link for 7" headlights that are steel and chromed if you are interested. Pretty cheap at $66 and they mount properly...from the side not the bottom.

Chrome Headlights

Also there are brackets that fit 35 mm tubes... I can't remember the diameter off the top of my head for your bike. Might be helpful..if yours a a shade bigger you could hone them out a mite.

Brake Fluid On Tire

Okay, I know what DOT 3 brake fluid will do to my paint. It dripped a little from the master cylinder banjo bolt and took the tank paint down to the undercoat.

But, now that my right front caliper is leaking, and I have a front tire and rim streaked with DOT3 I wonder, what will this do to the tire itself? Anything?

What's the best way to get the DOT3 off my Dunlops!

Yes, meanwhile, I am parking the bike and ordering replacement brake lines. Trying to justify some stainless steel brake lines in the process.

Fairing Crack

I rode my 1982 Goldwing in 40 degree weather, and parked it in the garage overnight.

Next morning there is a 4 inch crack on the inside of the fairing -- not the fairing itself, but the plastic housing on the inside of it.

This original equipment is pushing 25 years old, but I was still surprised to see it crack like this with no warning.

Any suggestions on repair?

Crappy Mileage Continues

I continue to have bad mileage with my GL1100. I consistently get 30 mpg while pretty much everyone else who has chimed in on the topic gets upper 30's or 40's.

I changed the plugs. I have checked the brakes and they are not dragging. I ran techron through the fuel system. I made sure the tires are properly inflated. They are.

I have plenty of power.

I have original stock exhaust. I have an after market K&N sponge-type filter that the previous owner installed. I'm wondering whether anyone has experienced a drop in fuel efficiency with an air filter like that?

If this isn't it, I guess I'm gonna have to do something to the carbs. Could the fuel mixture be too rich?

I'm gonna balance the carbs as soon as I buy the 4-carb balancing tool from JCWhitney. Could the carbs be so far out of balance that I get crappy mileage?

Or am I looking at opening up the carbs and adjusting them leaner? (That would be my first carb adjustment job. I've swapped carbs before, but not adjusted them. )

Stumbling In The Rain

This bike never rides rough, except, twice now, when caught in a downpour, and sitting at a stoplight, it starts to falter and idles rough. Idle drops and it dies.

Any ideas? Plug wires are fine, plugs are new, and symptom only occurs in heavy rain.

Baffles – A Gold Winger’s Haiku

(With apologies to Carl Sandburg, and Honda motorcycles)

Without a sound comes
The quiet Gold Wing Rider
On little cat feet

---

My "fellow motorcycle enthusiast friend" Dennis (it's easier just to say "Biker friend") sent me this poem after he found out I was buying a Gold Wing. I don't think he was familiar with the famous Carl Sandburg poem upon which it is based. But he and I both got a kick out of it.

Compression: 90 psi

I did some routine maintenance on the 82 GL1100 today, and did my first ever compression test.

Warmed the bike up, and got readings between 85 and 90 psi on all cylinders.

According to Clymer's manual, readings under 140 mean an engine overhaul is due.

My question is, how bad is 90 psi? How imminent is my overhaul?

I'm assuming from the burning oil at startup that I'll need new rings. I have not checked the valves yet (plan to do that this winter when I replace the valve cover gaskets and timing belts).

I haven't checked compression on my wife's V30 yet. But when I do, should I do it cold or warm? What threshold do you use when considering compression on a V4. What is too low for comfort?

Intermittent Oil Loss

On my 1982 GL1100, I check the oil every tank of gas. Most of the time the oil level is spot on, no loss. But twice now I've lost an entire quart of oil during the tank. Oil is always checked engine cold, bike on centerstand.

I cannot correlate this loss to anything specific in my driving. The first time it had happened was after 700 miles of commuting, I checked the oil, it was fine. I took at 100 mile country drive. Before I turned it toward home (the engine was cold and bike was on the center stand) I checked the oil and holy smokes, I'm a quart low. Must've been something strange in the 100 mile run. Extended run at highway speeds, right?

Well, wrong. It didn't use any oil on the return trip. Even though it was the same distance and same type of ride. Perplexed, I vowed to keep a close eye on the oil level.

I did another 650 mile drive, and drove another 200 miles of commuting traffic, and didn't lose any oil. I checked it after every tank.

Then, this last tank, another one spent in commuting traffic, I lost a quart.

What gives?

Erratic Oil Loss

This is the strangest thing I've come across yet. I have a new-to-me 82 1100I. I check the oil every tank of gas. Most of the time the oil is spot on, no loss. But twice now I've lost an entire quart of oil during the tank.

I cannot correlate this loss to anything specific in my driving. The first time it had happened was after 700 miles of commuting, I checked the oil, it was fine. I took at 100 mile country drive. Before I turned it toward home (the engine was cold!) I checked the oil and holy smokes, I'm a quart low. Must've been something strange in the 100 mile run. Extended run at highway speeds, right?

Well, wrong. It didn't use any oil on the return trip. Even though it was the same distance and same type of ride. Perplexed, I vowed to keep a close eye on the oil level.

I did another 650 mile drive, and drove another 200 miles of commuting traffic, and didn't lose any oil. I checked it after every tank.

Then, this last tank, all commuting traffic, I lost a quart.

What gives?

I should mention that the head covers do leak a small amount of oil. I plan to replace the head cover gaskets. The previous owner must've bought them fancy new chrome head covers and put them in place with old gaskets. The only evidence I ever see of this leak (unless I lie on the ground under my bike and look up) is a little quarter sized spot of oil on my left boot from tucking it under the head cover while shifting. I know this obvious leak seems like a likely culprit for my oil loss, but it doesn't quite add up. I see the spot of oil on my boot yet I consistently have good oil level for tank after tank. Then, all at once, in one tank, I lose a quart. If it were a consistent loss rate it'd make more sense to me.

Speedometer Cable

My wife and kids were in the Tahoe. The DVD player was playing "High School Musical" to entertain the kids. The trailer behind the Tahoe held my wife's V30. My Wing was in its natural state, and was ready to head out into its element -- the Interstate, for which it is aptly named.

I had to mail something from the post office before I left town. As I pulled into the post office parking lot I heard a horrible squeal from the speedometer cable. I have heard this squeal before, in cold weather, from my own V30's cable. So I knew the sound.

10 minutes later, out on the interstate, I shift into 5th gear and discover my speedometer is reporting 0 mph. Ugh, my speedometer cable has given up the ghost.

Ironic, my wife's did that a few weeks ago. I replaced her cable with a spare from my own derelict V30, and restored hers to operating condition.

Now here I was setting out on a multi-day journey and no speedometer.

I think I remember that at 4000 rpm I'm doing about 65 mph, so I'll use the tachometer in place of a speedometer. Actually, I think I'll just go with the flow.

I stopped for refreshment at a rest stop about an hour from home.

"Is that 100th Anniversary?" a trucker asked me.

I looked at him quizzically. Was he asking me whether my bike was a 100th anniversary edition? Really, when is Honda's 100th anniversary? I'm sure it hasn't happened yet. Harley's, of course, was in 2003.

Then I realized he was asking about my T-shirt, which I purchased when attending Harley's 100th anniversary party in Milwaukee, in 2003.

"Yes," I answered.

"Were you there?" he asked me.

"Yes, I was," I answered. "Were you?"

"Yes, I sure was," he replied.

I'm sure he wondered about a Honda Gold Wing rider wearing a Harley 100th Anniversary T-Shirt. But he did not voice any questions.

He said, "Ride safe. You might wanna get out your rain gear, it's raining up North."

"Really?" I said, "I am heading North."

This, of course, was obvious, since we were at a rest stop where all traffic had exited from and would be returning to I-65 North. The southbound and northbound traffic did not intermix at the rest stop.

Before I left I inspected the speedometer cable.

Checked the bottom first, down by the front axle. Nothing out of place.

Checked the top. Well, would you look at that. The cable has detached itself from the speedometer housing altogether. Sheepishly I screw the cable back into the back of the speedometer housing. I take off down the on ramp back onto the interstate and voila, I have a speedometer again.